Fit damping materials

Sound Absorbent Foam

Genuine Sheeps Wool

Sound Absorbent Felt

Felt Damping Strip and Coins

Bitumastic Damping Sheet

* Sound Absorbent Foam.

       Used for Loudspeaker cabinet damping, this sound absorbent foam is an ideal contender for damping the higher frequencies in speaker enclosures. Coloured grey, it has a closed cell construction, is easy to bend / fit into a variety of loudspeaker enclosures and may be cut to shape using a sharp scalpel. This sound absorbent foam provides a cost-effective and clean method of installing speaker enclosure damping to your home project. Nominal thickness 16mm. Supplied in rolled sheet format, 600mm * 1200mm = 1 piece.

* Sheeps Wool.        **** NEW ****

       Genuine British, scoured Herdwick Blend, Sheeps Wool. Cleaned, washed and moth-proofed to dissuade free auditions, this is the upgrade to polyfill and other synthetic type fillings. Ideal for stuffing your loudspeaker cabinets and ideally suited for transmission line stuffing. Available in 250gm and 500gm packs. As a general guide, 250gms of wool stuffing will be sufficient per 1 cubic foot of stuffed volume or 28L whichever you like. Of course you can use more or less as required.

* Sound Absorbent Felt.

       Used for damping the internal resonances and reflections in loudspeaker enclosures. This speaker felt is of a mat wool and composite material construction. The sound absorbent felt is supplied in two material weights 1700gms or 1100gms per square metre. Nominal thickness is 10mm or 7.0mm uncompressed. Supplied in rolled / sheet format 300mm * 700mm  = 1 piece. See below for alternative sizes.

*  NEW ** Larger Size (300 * 1400)mm

*  NEW ** Larger Size (600 * 1400)mm

*  Mechanical Damping Felt.

       A heavyweight hard cotton / wool felt available in felt strips of (30 * 150 * 10)mm and which may be cut to size or shape. Also available as felt coins 25mm diameter by 7.5mm thick. The material is used to dampen unwanted mechanical vibration. Ideal for speaker stand platforms or beneath equipment. Non adhesive backed.

*  Bitumastic Damping Sheet.

       A heavy grade self adhesive backed Bitumastic damping material used for sound deadening. Now available in 2 weight options. Sheets / pads of (600 or 300)gms per sheet, The sheets are both (200 by 300)mm and are used for quietening down resonant panels. The adhesive provides good material coupling to wood panels. For extra security it is recommended the sheets are tacked / nailed into place as this will prevent creep or failure / detachment in hot weather.

Larger sizes are available for customer collection only in the following sizes. For best results this material should be transported and stored flat.

For Postal Samples of Bitumastic Damping Sheet (DAMPSHT1) or (DAMPSHT2), please enclose four (4) First Class Stamps in an envelope along with your name and UK address. Sample size (100 * 50)mm.

All Prices include VAT @ 20%.   See buy it for further information.