|
[Home] [Up] [Active Filters] [Apex 100] [Bass Bins] [Bookshelves] [DIY Xovers] [HQA_35L] [Kits 'n' Cabs] [Miniatures] [Mosfet Amp.] [MTM_R4] [Stands] [Transmission Line]
Low Profile Floorstanders
American Walnut, Low Profile
Low Profile Stands.
Constructed from selected
hardwood front and rear cheeks and birch ply these low profile stands offer an
attractive aesthetic alternative to fixing spikes directly into the bottom panels
of floor standing speakers. Each stand is fitted with M6 hex section spikes,
(removable, if required), and hard felt pads on which to place the speakers.
Suits most floorstanders of width (190 - 220)mm and (300 - 350)mm depth.
Available with Ash or Oak front and
rear cheeks. Oiled and waxed finish.
Overall dimensions, mm:- Height, less
spikes 60, width 275, depth 365
Maximum recommended load 30Kgms.
Custom lengths / dimensions by
agreement.
Column Stands
Designed to elevate the smaller loudspeaker to the optimum listening level the column
stands are constructed from veneered MDF / Plywood materials with selected hardwood
panel trims. To achieve improved damping and reduce any column resonance the centre column may be filled, (not
supplied), with dry sand / small shingle etc.
Each stand is fitted with M6
hex section spikes, (removable, if required),
Overall dimensions, mm:- Height, less
spikes, 525, Base (282 * 230),
Top platform (244 * 199)
Typical filled weight 525mm 7Kgms.
Maximum recommended speaker load
10Kgms.
Options on overall height (525 or
650)mm
Finishes:- (SV), standard veneers, Ash,
Cherry, Oak, Mahogany, Teak,
oiled and waxed.
Finishes:-
(EV), exotic, Santos rosewood,
Castillo, Birds-eye Maple, Yew, oiled
and waxed. Subject to availability.
Finishes:- (BA), budget, Casework,
Oiled MDF column, no trim, ply platforms
sanded and oiled, uses Birch plywood.
Other finishes by arrangement and availability
Note:- Do not use lead shot as a
column filler, the large additional mass / weight may cause warpage of the base.
| Order Code |
Description |
Options |
Price / Pr GBP |
| LPSMDF |
Low profile stands + Pads &
Spikes: In 25mm oiled MDF |
On depth |
£65.00 |
| |
|
|
|
| LPSA |
Low profile speaker stands, Solid Ash Front/Rear cheeks. |
On depth |
£80.00 |
| LPSO |
Low profile speaker stands, Solid
Oak Front/Rear cheeks. |
On depth |
£80.00 |
| |
|
|
|
| CUSTLPS |
Custom low Profile. Shown
is solid Walnut: Prices from:- |
|
£160.00 |
| |
|
|
|
| CSBV |
Column stands 525mm, oiled MDF, ply platforms,
no trims |
On length |
£160.00 |
| CSBVL |
Column stands 650mm, oiled MDF, ply platforms,
no trims |
On length |
£170.00 |
| |
|
|
|
| CSSV |
Column stands 525mm height, std veneer, hardwood
trims |
On length |
£190.00 |
| CSSVL |
Column stands 650mm height, std veneer, hardwood
trims |
On length |
£200.00 |
| |
|
|
|
| CSEV |
Column stands 525mm height, exotic veneer, hardwood trims |
On length |
£255.00 |
| CSEVL |
Column stands 650mm height, exotic veneer, hardwood trims |
On length |
£265.00 |
All Prices inclusive of VAT @ 17.5%. Carriage + Packaging inc VAT, UK
Mainland:-Plus £15
Issue 5: Last modified
August 05, 2007 |
